FlyFly Hobby TopGun F-100 Super Sabre 92mm EDF kit

FlyFly HobbyTopGun Hobby Top Gun F-100 Super Sabre RC Jet airframe Kit with 92mm EDF (Electric Ducted Fan) unit
This kit is also sold overseas under the Hobby Topgun name

Can it do grass? Yes it can!
One of the most important features of an aircraft in Australia is it's ability to take off and land on a grass runway.

Have you (ChargedRC) flown it? Not yet, but soon :)
At ChargedRC we are working towards building and flying every kit we sell.  After all, you can't really write a description of flight characteristics without flying it yourself right?

Specification:

• Material: Styrofoam (EPS)
• Wingspan: 1220mm(48")
• Length     : 1520mm(59.8")
• Wing Area: 32dm sq.
• Height     : 440mm
• Airfoil     : Semi-symmetrical
• Flying weight: 2700g (with air retract landing gear, 6 cells)
• Fan unit: 92mm
• Landing gear: Fixed
  (optional air retracts available)
• Radio : 4-5ch (not included)

Recommended power system: Not included (A FlyFly electronics kit is available from us separately - see below)

• Motor: 1500-1800kv (Outrunner)
• ESC: 60A w/BEC
• Battery     : Li-Po, 18.5v-22.2v (5 - 6 cells), 3600mAh, 20C
• Servo: Micro servo (8g) x 3, torque > 2.2kg

Manufacturer description:

The original F-100 Super Sabre was designed to be a higher performance follow-on aircraft from the original F-86 Sabre.  The FlyFly version is a scale model painted at the factory and while assembly is fairly straight forward, the kit is intended for a modeller experienced in building. That said, any FlyFly kit would make an excellent first build model. All airframe components are moulded from high impact EPS foam. It is powered by single new developed 92mm ducted fan unit which is designed to work perfectly with the new 1500kv outrunner brushless motor (available separately as part of the FlyFly electronics kit). The kit comes with the fixed scale aluminium suspension undercarriage with optional retracts available separately.

There is enough room in the fuse for a larger batteries if you so desire.  Depending on your level of skill, build time is around 3-6 hours - most pilots can have this aircraft ready to go with a few evenings of building.

Please note: FlyFly models do not come with any electronics, and with fixed landing gear. Optional air retracts and a FlyFly electronics kit are available separately.

Flight Video: Coming soon

Pilot Skill:
ChargedRC recommends an intermediate to experienced pilot.  Will update after we fly one.

Extra stuff (for your information):
Please note that all aircraft kits are now double boxed for shipping and the cost of double boxing is now included in the shipping cost. Our courier allows us to place "Fragile" and "Top Load Only" markings on the kit boxes we send with them, so double boxing is usually enough protection for your expensive model.  We do offer insurance and a re-delivery (courier will attempt re-delivery of package instead of leaving it) service if you like so please send us an email before placing your order if you wish to have these services.

Required:
4-5ch radio control transmitter and receiver
All aircraft electronics.  We have a FlyFly EDF Electronics (Motor/ESC/Batt/Servos) pack available, see below.
Optional air retracts also available.

Customer Reviews:

You may also be interested in this/these product(s)

FlyFly EDF Electronics (Motor/Batt/ESC/Servo) Pack AU$399.00

FlyFly Air Retract System AU$95.00

iMax B6 6s Multi-function Battery Charger Package AU$99.00