Freewing XT 70 "Cobra" 70mm Sports EDF Jet (PNP)

Freewing XT 70 'Cobra' 70mm EDF PNP Sports Jet
This aircraft is sold overseas under different brand names like eRC. It is from the same mold as the Hobby Lobby Rebel 70 Sports Jet.

*Important*
This aircraft comes in PNP (Plug N Play) only. You will require your own battery and radio gear. Recommended battery size is in the specifications section below.

Can it do grass? YES IT CAN!
One of the most important features of an aircraft in Australia is it's ability to take off and land on a grass runway.

Have you (ChargedRC) flown it? Yes we have!
At ChargedRC we are working towards building and flying every kit we sell. After all, you can't really write a description of flight characteristics without flying it yourself right?

Specification:

• Wingspan: 920mm (36-1/8")
• Length: 1100mm (43-1/8")
• Flying Weight: 1043g (37 oz)
• Drive System: 3000kv brushless outrunner motor
  
• EDF Diameter: 70mm
  
• Servo: 5x 9g servos
  
• ESC: 45A
• Recommended Battery: 2200-3300mah 4s1p 14.8v LiPo Batteries (required)
  
• Recommended Radio: 4ch radio gear (required)
  

Features:

• 4 ch Radio Control (Rudder + nose-wheel, Aileron, Elevator, Throttle) (5ch with mixing if you want separate ailerons)
• Pilot included
• EPO Foam construction
• Modular construction - easy to replace parts
  
• Removable landing gear
  
• Magnetic battery hatch
• All gears are on sprung alloy struts to absorb those less than perfect landings
  
• 90% assembled - all electronics (servos, ESC and motor) pre-installed at factory, just finish airframe assembly, connect up the servos, charge the battery and fly!

Description:
This is a fantastic aircraft from Freewing; they created this jet with the aero-modeller in mind! Its easy to build, easy to fly but fast and maneuverable enough to satisfy even the most extreme pilots. This is a great sports jet for a pilot who is looking for a nice relaxing model to fly but which can transform into an extreme sports jet by flicking to high rates and pushing up the throttle.

The strong modular construction from EPO foam with the high visibility decals allow the pilot excellent visual contact with the aircraft no matter what maneuver you're executing. Assembly is very easy, almost all parts are screwed in - only two require glue. The sprung landing gear are completely removable if the pilot opts for hand launching which is incredibly easy to do with this jet.

Flight surfaces are generously sized and the included rudder is great for performing knife edges, point rolls and for helping you make a perfect landing in a cross wind.
Yes, this is the same jet from the same factory and mold as the Hobby Lobby ERC Rebel 70.

Grab yours today!

Video:

Pilot Skill:
ChargedRC recommends an intermediate experienced pilot. 

Extra stuff (for your information):
Please note that all aircraft kits are now double boxed for shipping and the cost of double boxing is now included in the shipping cost. Our courier allows us to place "Fragile" and "Top Load Only" markings on the kit boxes we send with them, so double boxing is usually enough protection for your expensive model. We do offer insurance and a re-delivery (courier will attempt re-delivery of package instead of leaving it) service if you like so please send us an email before placing your order if you wish to have these services.

Required:

• Your own radio gear and batteries as this is a PNP kit.
• 4s capable LiPo charger
• 2 part epoxy or foam safe CA glue with accelerator (we recommend that you use these glues if the kit does not include epoxy)

Customer Reviews:

You may also be interested in this/these product(s)

iMax B6 6s Multi-function Battery Charger Package AU$99.00

ChargedRC Premium 2200mAh 35/70C 4s1p 14.8v LiPo AU$59.99

iMax C-403 1-4s LiPo/LiFe Balance Charger AU$59.99